The function of cold storage room should be to provide an unchanged temperature and relative humidity as far as it is possible. Even if it is in a short time, each rise of temperature causes an acceleration on generation of microorganisms. For that reason, Cold Room Doors are very important.

 

As it can be seen in the pictures, Cold Room Doors have 4 different major types:

SLIDING DOOR

Door Wing: It is produced by injecting 42 (±2) density polyurethane between two sheets.

Door thickness: It is 92 mm for cold storage rooms and 120 mm for frozen conservation storage rooms.

Hanger Equipment: Carrier rails, wheels, grip handles, and necessary accessories are made from stainless steel.

Surface: Both sides of wing are PVC sheets. Optionally, this part can be produced as polyester sheets and CrNi.

Heat Bridge: It is sealed with single-row- rubber gaskets. On the frames of frozen conservation storage room doors, there is an easily replaceable resistance when it is necessary.

Cold Room Door Frame: Outer frame is special PVC. Inner frame is aluminum.

Sizes:  Production can be made in desired sizes up to 250 X 300 cm net fitting.

MONORAIL SLIDING DOOR

Door Wing: It is produced by injecting 42 (±2) density polyurethane between two sheets.

Door thickness: It is 92 mm for cold storage rooms and 120 mm for frozen conservation storage rooms.

Hanger Equipment: Carrier rails, wheels, grip handles, and necessary accessories are made from stainless steel.

Surface: Both sides of wing are PVC sheets. Optionally, this part can be produced as polyester sheets and CrNi.

Heat Bridge: It is sealed with single-row- rubber gaskets. On the frames of frozen conservation storage room doors, there is an easily replaceable resistances when it is necesary.

Cold Room Door Frame: Outer frame is special PVV. Inner frame is aluminum.

Sizes:  Production can be made in desired sizes up to 250 X 300 cm net passing.

DOUBLE-WING SERVICE and PUB DOORS

These are double- wing cold room doors which can be mounted on panels and walls in cold rooms. These doors can be opened to in both directions, are with polyurethane filling, and have 40 mm thickness. They can be optionally made with a window or without a window and controlled easily thanks to their passing comfort and windows. Double-wing Service and Bar Doors, which can be opened to both directions in 180 degree angle, can be produced up to 200 X 250 net fitting if it is ordered.

 

HINGED DOOR

Cold Room Door Wing: It is produced by injecting 42 (±2) density polyurethane between two sheets.

Door Thickness: It is 68 mm for Cold Rooms an it is 92 mm for Frozen Conservation Storage Rooms.

Lock: When it is locked, it has the property of being unlocked from inside and anti-panic handle is phosphoric and luminous.

Hinge: It is produced in a way it can be easily raised and adjusted. .

Surface: Both sides of wing are PVC sheets. Optionally, this part can be produced as polyester sheets and CrNi.

You can contact with us about your wholesale orders or your project-based commissions for Cold Room Doors and Accessories.